### Categories

### RSS Feed

### Search NewtonExcelBach

### Archives

### Top Posts

- Using LINEST for non-linear curve fitting
- Using Goal Seek on Multiple Cells
- Solving Quadratic, Cubic, Quartic and higher order equations; examples
- Cubic Splines
- The angle between two vectors, Python version
- Drawing in Excel 7 - Creating drawings from coordinates
- Frame Analysis with Excel - 4, 2D frame analysis
- Commenting a block of code in VBA
- Downloads
- Buckling of columns with varying cross section

### Recent Comments

dougaj4 on Buckling of columns with varyi… Marco Valsecchi on Buckling of columns with varyi… Displaying trend lin… on Using LINEST for non-linear cu… RCInteract and RC De… on RC Design Functions 7.03 Larry Schuster on Using LINEST for non-linear cu… Larry Schuster on Using LINEST for non-linear cu… dougaj4 on Using LINEST for non-linear cu… dougaj4 on Using LINEST for non-linear cu… dougaj4 on Using LINEST for non-linear cu… Larry Schuster on Using LINEST for non-linear cu… dougaj4 on Using LINEST for non-linear cu… Larry Schuster on Using LINEST for non-linear cu… dougaj4 on Using LINEST for non-linear cu… dougaj4 on Using LINEST for non-linear cu… Larry Schuster on Using LINEST for non-linear cu…

# Tag Archives: continuous beam analysis

## ConbeamU 4.10

The ConbeamU spreadsheet has been updated to Version 4.10, to fix a problem with incorrect default parameters being used if the support stiffness columns had empty cells. The revised spreadsheet (including open-source code) can be downloaded from: ConbeamU.zip Applications in the … Continue reading

Posted in Beam Bending, Excel, Finite Element Analysis, Frame Analysis, Newton, Strand7, UDFs, VBA
Tagged ConBeamU, continuous beam analysis, Excel, Fixed End Moments, moving load, Restrained End Moments, Strand7, UDF, VBA
22 Comments

## ConBeamU 4.08

The continuous beam spreadsheet has had another update to fix a problem when point loads were applied to cantilevers, and the first support position was not listed as an output point. The new version (4.08) can be downloaded from: ConbeamU.zip … Continue reading

Posted in Beam Bending, Excel, Finite Element Analysis, Frame Analysis, Newton, Strand7, UDFs, VBA
Tagged ConBeamU, continuous beam analysis, Excel, moving load, Strand7, UDF, VBA
Leave a comment

## ConBeamU 4.05 and ConBeampy 1.02

The latest update of the two continuous beam spreadsheets can be downloaded from: ConBeamU.zip ConBeampy.zip The main changes are: A problem with point loads applied exactly at a support position has been corrected A function has been added to evaluate … Continue reading

Posted in Beam Bending, Excel, Finite Element Analysis, Frame Analysis, Link to Python, Newton, UDFs, VBA
Tagged continuous beam analysis, Excel, Macaulay's Method, Python. Excel-Python, UDF, VBA
1 Comment

## Conbeam – Python version

I have converted the continuous beam analysis spreadsheet (last presented here) to Python code, linked to Excel VBA User Defined Functions (UDFs) with ExcelPython. To run the Python version you will need an installed copy of Python, including Numpy and … Continue reading

Posted in Beam Bending, Excel, Finite Element Analysis, Frame Analysis, Link to Python, Newton, UDFs, VBA
Tagged Conbeampy, ConBeamU, continuous beam analysis, Excel, ExcelPython, Python, UDF, VBA
Leave a comment

## ConbeamU Update Update

Following some comments from 4Step on the last ConbeamU update, and a thorough check of results against Strand7 results, I have posted a new version that fixes a number of issues with the previous one. The new version number is … Continue reading

Posted in Beam Bending, Excel, Frame Analysis, Newton, Strand7, UDFs, VBA
Tagged ConBeamU, continuous beam analysis, Excel, Strand7, UDF, VBA
4 Comments

## Continuous Beams with Specified Deflections

A few weeks ago there was some discussion in a previous continuous beam post about how to analyse a continuous beam with specified deflections at the supports. In this post I will look at three different ways of doing this … Continue reading

Posted in Excel
Tagged ConBeamU, continuous beam analysis, Excel, specified displacements, UDF, VBA
1 Comment

## ConBeamU Update

Recently a comment pointed out that if the ConBeam, or ConBeamU, user defined functions were used with a single span then the “Out” argument was ignored, so it was not possible to return support reactions. This has now been fixed … Continue reading

Posted in Beam Bending, Excel, Frame Analysis, Newton, UDFs, VBA
Tagged continuous beam analysis, Excel, UDF, VBA
18 Comments