The update to the Glob_to_loc3 and Loc_to_glob3 functions (and associated functions) has now been transferred to the 3DFrame spreadsheet, which will now give correct results when beams are defined in the global negative Z direction. The revised spreadsheet (including full open source code and compiled solver files) may be downloaded from:

### 3DFrame.zip

See 3DFrame with spring releases for more details, including examples, and 3D Frames, axes and stiffness matrices for information on local axis conventions used, and details of the procedure for generating the 3D stiffness matrix.

Advertisements

Hi,

This 3Dframe analysis programme is excellent.

But I get an error message as following when I run it with VBA solver:

I try to debugg it and the error happens in mFrameP44 at

ReDim kvo(1 To nkvd, 1 To 1)

I take the unchanged example exist in 3DFrame.zip

I want/can not use the extern solvers.

LikeLike

It works on my machine (with 32 bit Excel), but I did find some unused functions, with calls to other functions that were missing, so I have commented all those out in 3DFrame-2_05a.xlsb

Are you using 64 bit Excel? If so the microtimer function may be causing problems, so I have saved another update with that commented out (3DFrame-2_05b.xlsb).

Both updates can be downloaded from: http://interactiveds.com.au/software/3DFrame-2_05draft.zip

If you have any trouble downloading please e-mail me at dougaj4 at gmail.

Could you let me know your Excel version, and if one or both (or neither) of the updates work for you?

Thanks.

LikeLike

Hi,

thanks for your effort.

I have tried the file 3DFrame-2_05b.xlsb, i haven’t success.

I am using Excel 2010 with 64bit but I also check it with Excel 2010 32bit version.

It does not matter which solver I chooses.

I get the same error:

Compile error:

Can’t find project or library

LikeLiked by 1 person

That’s strange, on my machine if it can’t find the dll files it switches to VBA and runs OK.

I’ll have another look tomorrow.

LikeLike

Just for knowledge I also came to what Gizli reported (Compile error: Can’t find project or library). And it happened with Excel 2013 32bit and Excel 2003 with W7 Professional. This last (Excel 2003) tested on another PC with XP SP3. Now it runs correctly on Excel 2013. I had to work on it to run it on Excel 2003 (and it seems to work). I only reported it now because I thought it was a problem with my PC, since on the same machine I installed two different versions of Excel and this It is not recommended.

Thanks for the great work dougaj4.

LikeLike

Could you try either:

Download: http://interactiveds.com.au/software/3DFrame-2_05draft.zip

again. It now has a file called 3DFrame-2_05VBA.xlsb which I hope will work with the VBA solver option.

Or:

Open 3DFrame-2_05b.xlsb and press Alt-F11 to open the VBA Editor.

Select Tools-References. If ALMatrixlib is listed and has a tick to the left, click to unselect it, then save. If that doesn’t work try closing Excel and re-opening and try again.

If that works for you please let me know, and I will upload a VBA only version, with all the references to the dll files removed.

LikeLike

The file called 3DFrame-2_05VBA.xlsb works. Very good 🙂

Can you tell me how I create nodal moment?

How can I create a hinge joint or sphrecal joint or Multiple point constraints?

LikeLike

I’m glad it worked!

I’ll post an update in the next few days, and answer your questions as well.

Could you give more details about what you are looking for in “multiple point restraints”?

LikeLike

Hi dougaj4,

how can I create a hinge joint or sphrecal joint?

How can I create a bushing joint?

Could you give me examples?

Bye

LikeLike

I have just posted links to new download files of the frame analysis spreadsheets, including VBA-only versions. I will post some examples in answer to your questions soon.

Can you let me know what you mean by “multiple point constraints”?

LikeLike

Multiple point constraints establish a relationship between degrees of freedom in one or more nodes.

LikeLike

Pingback: Installing Frame4 and 3DFrame | Newton Excel Bach, not (just) an Excel Blog